Fanuc Motor Part Number Breakdown - Alpha

+447568431113 sales@cncspares.co.uk

Fanuc Alpha Motor Models α1/3000 α2/2000, and α2/3000

The standard shafts used for models α1/3000, α2/2000, and α2/3000 are taper shafts.
Use a taper shaft as far as circumstances, such as the delivery time and maintenance permit.

Models
α3/3000 α6/2000 and α6/3000

The standard shafts used for models α3/3000, α6/2000, and α6/3000 are taper shafts.
Use a taper shaft as far as circumstances, such as the delivery time and maintenance permit.

Models
α 12/2000, α12/3000, α22/1500, α22/2000,
α22/3000, α30/1200,α30/2000, α30/3000,
α40/2000, and α40/2000 (with fan)

A straight shaft is fitted as the standard shaft for models α12 to α40.
When early delivery and case–of–maintenance are important, a straight
shaft should be used. For model α40, a tapered shaft is not available.

Models

α65/2000, α100/2000 and α150/2000

A06B-03-B

If you need the more common Fanuc Pulse coder we stock the Alpha 64, Alpha I64 and Alpha A1000 Fanuc Encoders
 

Models
α300/2000, α400/2000

For these models, a tapered shaft is standard. a straight shaft is not available.
For these models the brake option is not available.

Fanuc Alpha motor part number meaning

• Contact
• Fanuc Alpha Drives
• New Fanuc Encoders

« back